Show Interfaces Status - Cisco Catalyst 4500 Series Configuration Manual

show interfaces status

show interfaces status
To display the interface status or a list of interfaces in error-disabled state, use the show interfaces
status command.
Syntax Description err-disabled
inactive
module module
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.2(40)SG
12.2(52)SG
Usage Guidelines When at least one VLAN on a port is error-disabled the output for the show interfaces status command
will display vl-err-dis in the VLAN column.
Examples The following example shows how to display the status of all interfaces:
Switch# show interfaces status
Port
Te1/1
Te1/2
Switch#
The following example shows how to display the status of interfaces in an error-disabled state:
Switch# show interfaces status err-disabled
Port
----
Fa9/4
Fa9/5
Fa9/6
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-754
show interfaces status [err-disabled | inactive ] [module {module}]
(Optional) Displays interfaces in error-disabled state.
(Optional) Displays interfaces in inactive state.
(Optional) Displays interfaces on a specific module.
Modification
This command was introduced on the Catalyst 4500 series switch.
Support for WS-X4606-10GE-E Twin Gigabit converter introduced.
Support for per-VLAN error-disable was introduced by adding Err-Disabled VLAN
column to output.
Name
Name
----
Status Vlan Duplex Speed Type
connected 1 full
connected vl-err-dis full
Status Reason
------ -------
notconnect link-flap
err-disabled psecure_violation
connected psecure_violation
10G 10GBase-LR
10G 10GBase-LR
Err-Disabled VLANs
-------------------
3-5
10,15
Chapter 2
OL-30934-01