Lifting And Supporting The Vehicle; Front Of Vehicle; Rear Of Vehicle - BRP can-am COMMANDER 2017 Series Operator's Manual

LIFTING AND SUPPORTING THE VEHICLE

Front of Vehicle

Place vehicle on a flat non slippery
ground.
Ensure vehicle shift lever is set to
PARK.
Install an hydraulic jack under front skid
plate.
Lift front of vehicle and install a jack
stand on each side under frame sec-
tion in front of the lip for center skid
plate.
tmo2011-001-315_a
1. Front of vehicle
2. Hydraulic jack
3. Jack stand
4. Lip for center skid plate
5. Center skid plate
Lower hydraulic lift and ensure vehi-
cle is supported safely onto both jack
stands.

Rear of Vehicle

Place vehicle on a flat non slippery
ground.
Activate 4WD mode.
Ensure vehicle shift lever is set to
PARK.
Install an hydraulic jack under the trailer
hitch.
______________
86
tmo2011-001-317_a
1. Hydraulic jack
2. Trailer hitch
Lift rear of vehicle and install a jack
stand on each side under frame sec-
tion in front of rear wheel.
tmo2011-001-316_a
1. Rear of vehicle
2. Jack stand
3. Frame section
Lower hydraulic lift and ensure vehi-
cle is supported safely onto both jack
stands.