Driver's Seat; Passenger Seat; Fuel Reservoir Cap - BRP Can-am MAVERICK Trail T Series Operator's Manual

EQUIPMENT
tmr2014-037-005_a
1. Semi-cinching tab
To fasten the seat belt, insert the latch
plate into the buckle, then pull the belt
to ensure it is properly fastened.
Adjust the seat belt tightly against your
body by pulling the shoulder belt up-
wards.
219001761-210_a
TYPICAL
WARNING
Wear seat belt properly. Make sure
it remains securely fastened and
tightened against the body. Make
sure it is not twisted or defective.
To release the seat belt, push on the
red button on the seat belt buckle.

10) Driver's Seat

The driver's seat can be adjusted for-
ward and backward.
______________
78
219001880-014_a
1. Adjustment lever
To adjust seat, move the seat lever to
unlock the seat. Release the lever to
lock the seat into desired position.
The driver seat is equipped with a sen-
sor integrated in the cushion. Refer to
MULTIFUNCTION GAUGE
219002007-201_a
UNDERSIDE OF DRIVER SEAT
WARNING
Never adjust the seat position
while driving.

11) Passenger Seat

The passenger seat is not adjustable.

12) Fuel Reservoir Cap

The fuel reservoir cap is located on the
right hand side of the ve hicle.
.