Wheel Hub; Wheel Hub Assembly; Wheel Hub Disassembly/Assembly - Segway VILLIAN SSV Series Service Manual

A
B
A
B
A

WHEEL HUB

Remove rim mounting seat assembly
◆ Remove the wheel (see wheel removal).
◆ Unplug: split pin [A]
◆ Loosen half axle nut [B]
◆ Unscrew the mounting bolt, remove the caliper [D],
◆ Remove axle nut [B], remove washer [E] and pull
C
◆ Separate the brake disc from the hub
B

Wheel hub assembly

◆ Installing a brake disc (see "Braking" chapter)
◆ Insert the new cotter 【A】 and bend it to the nut
!
◆ When inserting the cotter, if the slotted nut does not
◆ Loosen once and tighten again as the slot passes

Wheel hub disassembly/assembly

◆ No need to press out hub bolts【A】.
◆ If any hub bolts are damaged, please replace hub
10 - 15
WHEELS AND TIRES
and let the caliper hang freely Hang up.
down hub Install seat assembly [C] and brake disc.
Tighten axle nut torque
300 N.m（ 30.6kgf·m，221ft·lb ）
【B】.
align with the open pin hole in the half shaft, tighten
the nut clockwise until the next hole is aligned.
through the nearest hole.
mounting seat 【B】 and bolt 【A】 totally.