Cooling Bottle Coolant - Segway VILLIAN SSV Series Service Manual

MAINTENANCE
A

Cooling bottle coolant

The coolant bottle is located under the cargo bed at the
rear of the vehicle.
1. After removing the cargo bed, observe the liquid level
in the bottle.
2. If the liquid level is low, remove the cap and add the
coolant as needed.Keep the coolant level between
the MIN and MAX mark on the bottle (while the liquid
cools).
A
【A】MAX
B
【B】MIN
3. Unscrew the lid and pour in new coolant. Observe the
coolant position when pouring and do not exceed the
maximum liquid level;
4. Reinstall the lid.
5. Install the ventilation hood.
Radiator Coolant
To ensure that the coolant maintains its ability to protect
the engine, we recommend that the system be completely
emptied every five (5) years with the addition of a new
antifreeze 50/50 premix.
!
A steam overflow can cause burns.Do not remove
the pressure cap when the engine is warm or hot.
The engine must be cooled before the pressure cap is
removed
Replace coolant with fresh antifreeze 50/50 premix when
any cooling system fluid is discharged for maintenance
or repair.If the recovery bottle is empty, check the liquid
level in the radiator.Add coolant as needed.
【A】Pressure CapRecovery
1. After removing the cargo bed.
2. Remove the pressure cap.
3. Add the coolant slowly through the radiator fi lling port
using a funnel.
4. Reinstall the pressure cap.The use of non-standard
pressure caps will aff ect the normal operation of the
recovery system. Your dealer can provide the correct
replacement parts
2 - 24