Brake Oil - Segway VILLIAN SSV Series Service Manual

Brake oil

Use the recommended brake oil:
Brake Oil
No adjustment is required for the hydraulic assisted
braking system. Check the brake oil level of the auxiliary
braking system frequently. If the level is shown to be low,
perform the following operations. The brake oil cup is
located below the front panel.
1. Remove the front shelf and the lower cover of the
instrument. See Page112 for the removal method;
2. Observe the liquid level in the container:
A
【A】MAX
B
【B】MIN
3. The brake fluid level is most suitable between the
upper plane and the lower plane. If it is lower than the
lower plane, please add the recommended brake fl uid
and observe the liquid level.
4. Check whether the brake pads are worn.
!
Brake fluid can damage plastic and painted surfaces
and should be added with caution.If the brake fluid
comes into contact with the skin or eyes, flush with
plenty of water immediately. If you feel unwell, seek
medical advice immediately.
Brake pads and brake discs
The wear of brake pads and brake discs will depend on
the severity of use and driving conditions. Brake pads
5mm
wear faster in wet and muddy conditions. Regularly check
1mm
the wear of the brake pads and brake discs according to
the maintenance schedule. If the wear of the brake pads
and brake discs exceeds the required value, the brake
pads and brake discs must be replaced.
Brake pad
thickness
brake discs
thickness
2 - 33
MAINTENANCE
DOT4
Standard thickness
Minimum thickness
Standard thickness
Minimum thickness
5.0mm
1.0mm
5.0mm
4.0mm