Transmission Belt; Disassemble The Drive Belt; Check The Drive Belt; Install The Drive Belt - Segway VILLIAN SSV Series Service Manual

CVT SYSTEM
A A
B B
C C

Transmission belt

Disassemble the drive belt

◆ Remove the CVT cover.
◆ Remove the handle on the CVT belt replacement
tool 【B】, and manually screw the CVT belt
replacement tool 【B】 into the thread of the CVT
driven pulley 【A】.
◆ Insert the handle 【C】 and move the handle
outward to open the CVT driven pulley.
◆ Remove the drive belt from the CVT driven pulley
and CVT drive pulley.
TIPS
The rotation direction of the drive belt after reinstallation
should be the same as the original one. When
disassembling, please pay attention to the identifi cation
information on the surface of the belt, or make a mark to
distinguish it when reinstalling.

Check the drive belt

◆ Check the transmission belt for wear, missing teeth,
cracks, etc. Compare the belt with the new one and
replace it if necessary.

Install the drive belt

◆ The installation steps are basically the reverse of the
removal.
◆ Wrap the drive belt around the CVT drive pulley.
◆ Use the CVT belt replacement tool to open the CVT
driven pulley and wind the drive belt into the CVT
driven pulley.
3-6-8