Pvt / Final Drive / Wheel And Tire; Cvt Belt - Segway VILLIAN SSV Series Service Manual

E
D
B
C
G
H
F

PVT / FINAL DRIVE / WHEEL AND TIRE

CVT belt

Replace the CVT drive belt according to the time
specifi ed in the vehicle maintenance schedule. If the CVT
belt is damaged, it should also be replaced.
When replacing the belt, clean the pipe and clutch and
the engine compartment for debris.
!
Failure to remove all debris when the belt is replaced
can result in vehicle damage, loss of control and serious
injury or death
【A】Cover Bolt
A
【B】CVT Cover
【C】CVT Driving Wheel mounting bolt
【D】Washer
【E】Driving wheel parts
【F】CVT Driven Wheel mounting bolt
【G】Driven wheel parts
【H】CVT belt
Stop the engine before replacement and allow the vehicle
to cool down.
1. Loosen the 10 fastening bolts on the CVT cover and
remove the CVT cover.
2. Loosen the fixing bolts and washers on the CVT
driving wheel component and the driven wheel
respectively.
3. Loosen the fixing bolts and washers on the CVT
driving wheel component and the driven wheel
respectively.
4. Remove the CVT belt to be replaced.
5. Move the driven moving plate assembly forcefully
to increase the gap between the driven and driving
plate, and then install the new CVT belt on the driven
wheel part.
If there are debris in the CVT inner box, please remove
all debris completely.
6. Install the other end of the CVT belt on the driving
wheel, reinstall the driving wheel and driven wheel
2 - 25
MAINTENANCE