Segway VILLIAN SSV Series Service Manual page 88

CRANKCASE\CRANKSHAFT\BALANCE SHAFT
D D
◆ ◆ Remove 4 through-tubing mounting bolts and Remove 4 through-tubing mounting bolts and
remove through-tubing assembly 【 【 D D 】 】 . . remove through-tubing assembly
◆ ◆ Remove 11pcs M6 bolts and 2pcs M8 bolts from the Remove 11pcs M6 bolts and 2pcs M8 bolts from the
upper crankcase upper crankcase
◆ Turn the crankcase and remove the 8pcs M10 bolts,
4pcs M8 bolts and 1pcs M6 bolt on the crankcase
◆ Use a rubber hammer to gently knock around the
crankcase, the crankcase will be loosened after the
lower crankcase up.
3-4-15