Toggle Switch For Two-Wheel Drive Or; Four-Wheel Drive - Segway SGW570F-A3 Manual

VEHICLE DEVICE

Toggle switch for Two-wheel drive or

Four-wheel drive

Key Key Instrument Instrument
Mode Mode
operation operation lcon lcon
Blue button Blue button
2 x 4
pressed， ，
pressed
Red button Red button
patterns
pops up pops up
Blue button Blue button
4 x 4
pressed， ，
pressed
Red button Red button patterns
pressed pressed
Definition of mode state Definition of mode state
Real axle differential
When the two-four-wheel drive switch is in the
two-wheel drive state, the whole vehicle is only
driven by the rear wheel, and the front wheel has
no power output. The meter shows the symbol "
" for the second drive. This mode is suitable
for vehicles driving on flat roads.
When the two-four-wheel drive switch (4-wheel
drive switch) is pressed, the symbol "
4-wheel drive is displayed on the instrument. At
this time, the instrument is in the state of 4-wheel
drive, with power output of the front wheel and
power output of the rear wheel. This mode is
suitable for muddy conditions, mountainous
conditions and other bad road conditions.
38
" of