Remove The Starter Motor; Starting System; Install The Starter Motor - Segway VILLIAN SSV Series Service Manual

A A
B B
A A
B B
C C

STARTING SYSTEM

Starting system

Remove the starter motor

◆ Disconnect the connecting wire harness on the
starter motor and remove the two bolts 【A】
◆ Pull out the starter motor 【B】 and remove the
starter motor

Install the starter motor

◆ Check whether the O-ring 【A】 at the gear end
of the starter motor is intact, and apply a proper
amount of engine oil on the surface of the O-ring
◆ Align the starter motor 【B】 with the mounting hole
and insert
◆ Screw in two bolts 【C】 to fi x the starter motor
9.8 N·m (1 kgf·m, 87 in•lb)
3-3-5
Bolt 【C】