Front Axle Disassembly - Segway VILLIAN SSV Series Service Manual

VEHICLE BODY AND FRAME

Front axle disassembly

◆ Remove the front drive shaft and the front drive shaft
(see the chapter on transmission system for details).
◆ Unplug the cable input plug on the front axle.
◆ Use suitable tools to remove the hoop, and remove
the front axle vent pipe;
◆ Remove the mounting bolts of the front axle lower
guard plate C (hexagon fl ange bolts M10×1.25×20),
and remove the front axle lower guard plate C.
!
Before removing the front axle assembly, please
make sure that the wiring harnesses on the front axle
assembly are completely disconnected from the frame
or main cables
◆ Before removing the front axle assembly, please
make sure that the wiring harnesses on the front
axle assembly are completely disconnected from the
frame or main cables
◆ Remove the mounting bolts (hexagon flange bolts
M10×1.25×215) and nuts (type 2 non-metallic insert
hexagon fl ange locking nuts M10×1.25) at the lower
part of the front axle, and take out the front axle
lower liner A
!
When installing the mounting bolts (hexagonal flange
bolts M8×20) on the upper part of the front axle, apply a
proper amount of thread glue to the threads.
13 - 27