Install The Parking Mechanism; Install The Bearing Plate Of The Left Box Body - Segway VILLIAN SSV Series Service Manual

FRONT AXLE AND REAR GEARBOX FRONT AXLE AND REAR GEARBOX
A A
F F
E E
A A
D D
B B
Installation
【A】Right gearbox
【B】 Deep groove ball bearing 6305
A A
◆ Tools: Bearing tooling 6305.
◆ Lay the box 【A】 flat, with the inner cavity facing
B B

Install the parking mechanism

【A】Push rod guide seat
【B】Parking arm return torsion spring
【C】 Hexagon socket pan head stepped bolt
【D】Parking arm
B B 【E】Parking arm shaft
C C
【F】Left box
◆ Tool: T40 inner plum blossom sleeve.
◆ Put 【A】 into the left box 【F】, 【B】 install it as
D D
! !
After installation, check that the parking arm 【D】 can be
fl exibly moved without jamming and rebounding.

Install the bearing plate of the left box body

【A】 Countershaft bearing pressure plate
【B】 Triaxial bearing press plate
【C】 Bolt M6×16
C C
【D】Left box
◆ Tool: 8mm sleeve.
◆ Apply thread glue to the connecting surface of the
4 - 20
upwards, and press into the bearing 【B】.
shown by the dotted line in the fi gure, apply thread
glue to the bolt 【C】 and lock it, install it into the
shaft 【E】 and then install 【D】, The torsion
spring 【B】 the moment arm snaps into the dotted
CAUTION
left box 【D】 and bolt 【C】, and lock the pressure
plates 【A】 and 【B】 in the direction shown in
Figure B.
Bolt M6×16
12N·m(1.22kgf·m,8.86ft·lb) (1.22kgf·m,8.86ft·lb)