Check Left Crankcase Cover; Install Left Crankcase Cover; Crankcase\Crankshaft\Balance Shaft - Segway VILLIAN SSV Series Service Manual

CRANKCASE\CRANKSHAFT\BALANCE SHAFT

A A
A A
1 1
4 4
7 7
8 8
2 2
3 3

check left crankcase cover

◆ ◆ Check the state of bearing Check the state of bearing 【 【 A A 】 】 , wire harness
B B
【 【 B B 】 】 , stator coil
◆ ◆ If you need to replace the bearing, can be heated by If you need to replace the bearing, can be heated by
the left crankcase cover bearing hole or use special the left crankcase cover bearing hole or use special
C C
bearing disassembly tools to remove the bearing. bearing disassembly tools to remove the bearing.

install left crankcase cover

B B
◆ Align the left crankcase cover assembly 【B】 and
the new gasket 【A】 with the positioning pins on
the crankcase and load into the left crankcase cover.
CAUTION CAUTION
!
The magneto rotor is magnetic, so be careful when
installing and removing the left crankcase cover. Do not
place your fi nger between the left crankcase cover and
the crankcase to avoid injury.
9 9
10 10
◆ Tighten the bolts in sequence
11 11
6 6
5 5
3-4-13
, stator coil 【 【 C C 】 】 . .
Bolt
9.8 N·m (1 kgf·m, 87 in•lb)
, wire harness