Camshaft Installation / Timing Adjustment - Segway VILLIAN SSV Series Service Manual

CYLINDER HEAD, CYLINDER, PISTON CYLINDER HEAD, CYLINDER, PISTON
A A
6 6
3 3
4 4
5 5
9 9
8 8
7 7
10 10

Camshaft installation / timing adjustment

CAUTION CAUTION
!
If any parts in the valve train have been replaced,
please refer to the valve clearance adjustment
procedure sequence.
Camshaft installation/timing adjustment
◆ Rotate the engine so that the top dead center (TDC)
mark of the magneto rotor is aligned or in the center
of the crankshaft position sensor (CPS) mounting
hole.
◆ In accordance with the intake and exhaust camshaft
marks made during disassembly. If you install a new
camshaft or the camshaft is not marked, you can
compare it with the electronic catalog according to
the part number on the camshaft.
◆ Before installation, lubricate all camshaft tips and
journal surfaces with engine oil.
◆ Put the intake and exhaust camshafts into the
corresponding cylinder head bearing seats. Turn the
camshaft so that the cam lobe points outwards.
◆ Installation:
C C
【A】 Cylindrical pin 6×10
B B
【B】 Camshaft cover assembly
【C】 Bolt M6×35
◆ Tighten the camshaft cover mounting bolts 【C】 in
order.
◆ Tightening torque
1 1
11 11
12 12
2 2
3-5-19
Bolt M6
9.8 N•m (1.0kgf•m, 87in•lb)