Eps Trouble Removal - Segway VILLIAN SSV Series Service Manual

ELECTRICAL SYSTEM
D
E
C

EPS trouble removal

TROUBLE SHOOTING
→
If the EPS is not working, fi rst check whether the EPS
fault light【E】 on the meter is on. If the fault light is
not on, check whether the 5A fuse【A】and 50A fuse
【B】in the fuse box are blown, and check whether
there is engine speed on the meter【C】display, if
there is no engine speed display, EPS will not work,
and the EPS fault light on the meter will not light up.
A
B
◆ The position of EPS gear in the meter, EPS is
divided into three gears: H/M/L【D】, the default is
M gear, when in four wheel drive locking mode(四
驱开关【G】按下）, it will immediately switch to
H gear; M gear and L gear are adjusted on the
mobile phone APP (only vehicles with TBOX can be
adjusted)
If the EPS fault light on the meter is on, it means that
the EPS is malfunctioning.
◆ EPS fault light【E】and fault code【F】in the
F
indicator
◆ The location is shown left.
G
14 - 74