ENGINE LUBRICATION SYSTEM
A A
B B
C C
A A
D D
E E
F F
B B
Remove the auxiliary oil pump rotor
◆ Disassemble:
【A】 Bolt M6×20
【B】 Oil pump cover Ⅱ
【C】 Cylindrical pin 6×10
【D】 Outer rotor of auxiliary oil pump
【E】 Inner rotor of auxiliary oil pump
【F】 Roller pin
Install the auxiliary oil pump rotor
◆ Replace with a new oil seal 【B】 and press it into
the oil pump body. The sealing lip side should face
inward
◆ Insert the oil pump shaft, the side with the threaded
hole should face outward
Remove the oil pump shaft and oil seal
【A】 Oil pump shaft
【B】 Oil seal 11×17×4
Install the oil pump shaft and oil seal
◆ Replace with a new oil seal 【B】 and press it into
the oil pump body. The sealing lip side should face
inward
◆ Insert the oil pump shaft, the side with the threaded
hole should face outward
3-1-12