Segway VILLIAN SSV Series Service Manual page 308

VEHICLE BODY AND FRAME
◆ Loosen the hoop and remove the CVT air inlet pipe
and CVT air outlet pipe. (See related chapters for
details)
!
After removing the CVT air duct, please effectively
protect the air inlet and outlet of the CVT to prevent
sundries from falling into the engine, thereby damaging
the engine
◆ Unplug the tubing connector [A] and unplug the
negative pressure tube.
!
A
When pulling out the oil pipe joint, please make sure
that the oil pump of the whole vehicle has been cut off
and use a rag to protect the joint to prevent gasoline
spraying
◆ Remove the gear shift components installed on the
engine.(See related chapters for details)
13 - 31