Segway VILLIAN SSV Series Service Manual page 65

EFI SYSTEM
A A
B B
A A
B B
EFI system EFI system
Remove the ignition coil
◆ Remove the two bolts 【A】, pull out the ignition coil
C C
Disassemble the electronic throttle valve
assembly
◆ Loosen the clamps on the intake pipes and
Install the ignition coil
◆ Insert the ignition coil 【B】 into the ignition coil hole
◆ Screw in the bolt 【A】 and tighten it according to
◆ Tightening torque
Install the electronic throttle valve assembly
C C
◆ Loosen the clamps on the intake pipes, align the
3-2-4
【B】
disassemble the electronic throttle valve assembly
of the cylinder head cover, and connect the spark
plug
the torque
Bolt 【A】
9.8 N·m (1 kgf·m, 87 in•lb)
electronic throttle valve assembly with the intake
pipe and insert, and tighten the two intake pipe
clamps.