FLASHER
Remove front cover (see the "Frame" chapter)
【A】Install rubber sleeve
【B】Flasher
Disassembly
Remove the installation rubber sleeve【A】from the
installation bracket
Remove the wiring harness connector
A
Replace the fl asher【B】
B
ELECTRICAL SYSTEM
TEST
→
◆ If the turn signal does not flash or flashes
abnormally on the whole vehicle (the normal turn
signal fl ash frequency is 85/min)
◆ The lamp is out of light (one-side forward or
backward turn light is damaged), and the turn
signal fl ashes at a frequency of 120/min)
14 - 21