Roll Cage Removal - Segway VILLIAN SSV Series Service Manual

VEHICLE BODY AND FRAME

Roll cage removal

◆ Remove the bolts of the A-pillar decorative panel
(hexagonal socket head screws M8×12) and remove
the A-pillar decorative panel; remove the bolts
(hexagonal fl ange bolts M8×16) connecting the left
and right upper mounting bracket components of
the cargo box. Before that, you may need to remove
the left and right front covers of the tail light cover
and other related plastic parts (refer to the relevant
chapters for details)
◆ Remove the bolts of the upper welding assembly of
the top beam (hexagonal fl ange bolt M12×1.25×25),
and remove the upper welding assembly of the top
beam. Before this, you may need to remove the roof
and B-pillar related plastic parts (refer to the relevant
chapters for details)
◆ Remove the A-pillar connecting bolt (hexagonal
flange bolt M12×1.25×75); remove the B-pillar
connecting bolt (hexagonal fl ange bolt M12×1.25×30,
nut (hexagonal lock nut M10×1.25) and remove it
Top beam left\right welding components. Before this,
you may need to remove the relevant plastic parts of
the B-pillar (refer to the relevant chapters for details)
◆ To install the roll cage, follow the reverse procedure.
13 - 16