Install Camshaft Sprocket - Segway VILLIAN SSV Series Service Manual

CYLINDER HEAD, CYLINDER, PISTON CYLINDER HEAD, CYLINDER, PISTON
D D
B B
A A
C C
◆ Calculate the clearance value by subtracting the
camshaft shaft diameter from the camshaft bearing
bore, and compare it with the specifi cation
Standard
0.025~ 0.067 mm (0.0009" ~ 0.0026")
CAUTION CAUTION
!
Cylinder head and camshaft cover are combined
processing and must be replaced as a set

Install camshaft sprocket

◆ Install the cylindrical pin 【C】 into the camshaft
【D】.
◆ Align the position of the pin hole and install the
timing sprocket 【B】, with the symbol on the side
facing outward.
◆ Apply thread tightening agent to the bolt 【A】, and
tighten the bolt according to the torque.
◆ Tightening torque
19 N • m (1.9 kgf • m, 14 ft • lb)
3-5-18
0.10 mm (0.0039")
Sprocket bolt
Limit