Tyre Mounting (For Anti-Drop Rims) - Segway VILLIAN SSV Series Service Manual

A
1
13
9
5
16
3
12
8
10
14 2
B

Tyre mounting (for anti-drop rims)

【A】Rim
【B】Bracket
◆ Support the rim 【A】 on A suitable bracket【B】to
◆ Tighten the detachable ring fastening bolts in a
B
◆ Infl ate the tire until the rim is fi xed to the tire rim.
Maximum tire infl ation pressure (can be fi xed to rim
when cold)
!
Do not infl ate the tire above the maximum tire pressure.
7
11 Overinfl ated air can cause a tire to explode, potentially
causing injury and death.
4
15
6
【C】Rim
【D】Screw sleeve
◆ If the anti-drop ring screw sleeve 【D】is damaged,
◆
D
10 - 13
WHEELS AND TIRES
prevent the tire from slipping off .
cross way.
Torque of anti-drop ring screw
20N.m（2.0kgf·m，14.8ft·lb）
Front and rear: 250 kPa (2.5 KGF /cm
please replace the anti-drop ring screw sleeve
screw sleeve torque
22~25N.m（2.2~2.5kgf·m，16.2~18.4ft·lb）
If necessary, replace rim 【B】and screw sleeve
【D】 as a whole.
2
, 36 psi)