Starting System Layout - Segway VILLIAN SSV Series Service Manual

STARTING SYSTEM LAYOUT

【A】Power lock
【C】Flameout switch
【E】Oil pump
【G】Start relay
【K】32Ah battery
Description of engine starting process：
1. Turn on the power lock 【A】, power on the whole vehicle, and check whether the upper gear of the
instrument 【B】 is in the N gear;
2. Turn on the fl ameout switch 【C】. After ECU 【D】 judges that it is powered on, it outputs a signal
to the oil pump relay, and the oil pump relay coil is closed;
3. After the oil pump relay works, the current is output to the oil pump 【E】, the oil pump starts to work,
and the oil pipe is fi lled with gasoline;4. Press and hold the start button 【F】 for a period of time, the
auxiliary start relay will close;
5. After the auxiliary starting relay works, output the starting signal to the starting relay 【G】;
6. After the starter relay works, the starter motor starts to work;
7. After the starter motor works, drive the engine to work through the gear, and the engine starts to start
at this time;
K
G
D
【B】Instrument
【D】ECU
【F】Start button
【H】Fuse box
14 - 27
ELECTRICAL SYSTEM
B
F
H
A
C
E