Disassembly Of The Rear Section Of The Drive Shaft - Segway VILLIAN SSV Series Service Manual

B
A
C
D
D

DISASSEMBLY OF THE REAR SECTION OF THE DRIVE SHAFT

Put the vehicle in a horizontal position fi rst
【A】 Right rear wheel assembly
【B】 Right rear rocker arm assembly
【C】 bolt
【D】 the rear segment of the drive shaft
◆ From the right side of the vehicle, first remove
the right rear wheel assembly 【A】, continue to
remove the right rear rocker arm assembly 【B】,
remove the engine end drive shaft fi xing bolts 【C】;
◆ Rotary drive shaft 180°, remove another fi xed bolt;
◆ Move forward the rear section of the drive shaft
【D】 to separate it from the output end of the
engine;
◆ Then the whole back exit drive shaft after section
【D】, and the middle drive shaft separation;
8- 3
DRIVE SYSTEM