A
B
A
B
A
Wheel hub
Take the wheels apart
◆ Remove the wheel (see Wheel removal).
◆ Remove cotter pin 【A】
◆ Loosen half shaft nut 【B】
◆ Unscrew the mounting bolts, remove the calipers
C
◆ Remove the axle nut 【B】and then pull down the
◆ Separate the brake disc from the hub.
B
Wheel hub assembly
◆ Installing a brake disc (see "Braking" chapter)
◆ Insert the new cotter 【A】 and bend it to the nut
!
◆ When inserting the cotter, if the slotted nut does not
◆ Loosen once and tighten again as the slot passes
Wheel hub disassembly/assembly
◆ No need to press out hub bolts【A】.
◆ If any hub bolts are damaged, please replace hub
10 - 15
WHEELS AND TIRES
【A】, and do not let the calipers hang freely.
hub assembly【C】 and brake disc.
Tighten axle nut torque
250 N.m(25 kgf·m,184 ft·lb)
【B】.
align with the open pin hole in the half shaft, tighten
the nut clockwise until the next hole is aligned.
through the nearest hole.
mounting seat 【B】 and bolt 【A】 totally.