Oil And Oil Filter; Oil Level Check - Segway VILLIAN SSV Series Service Manual

B B
A A
C C
ENGINE LUBRICATION SYSTEM
Oil and oil fi lter Oil and oil fi lter
WARNING
!
Running the vehicle with insufficient engine oil,
deterioration or contamination may cause the engine or
transmission system to jam, malfunction and damage

Oil level check

◆ Park the vehicle on a fl at ground and keep it level
◆ If the oil has just been changed, start the engine, run
it at idle speed for 5 minutes, fi ll the oil fi lter
CAUTION
!
Let the engine idle for a few minutes so that the oil can
reach all parts of the engine. Engine running in a state
of lack of fuel will cause serious damage
◆ Stop the engine, wait 2 minutes, let the oil in the oil
circuit return to the oil pan
◆ Pull out the oil dipstick assembly 【A】, dry the oil
on the dipstick, and reinsert the dipstick tube
◆ Pull out the oil dipstick assembly 【A】 and check
the oil level. The liquid level should be between the
upper "F" level line 【B】 and the lower "L" level
line 【C】
If the oil level is too high, the excess oil can be released
through the oil drain plug
If the oil level is too low, you can replenish the oil
through the oil fi ller. Using Segway Specialize Lubricant
Oil Synthetic Blend Engine Oil 10W-40 is highly
recommended.
3-1-7