Install Drive Pulley And Driven Pulley - Segway VILLIAN SSV Series Service Manual

CVT SYSTEM
C C
D D
E E
H H
I I
B B
A A
F F
G G

Install drive pulley and driven pulley

◆ Install the CVT driven pulley 【B】 on the gearbox
shaft, and lock the CVT driven pulley 【B】 with the
CVT stop tool 【A】.
◆ Install the washer 【C】 and the driven pulley bolt
【D】, and tighten the driven pulley bolt 【D】
according to the torque.
◆ Tightening torque
Driven pulley bolt
80 N • m (8.2 kgf • m, 59 ft • lb)
◆ Use oil-free cleaning fl uids such as trichloroethylene
or acetone to clean the following parts:
Crankshaft cone 【E】
Cone surface of driving wheel 【F】
WARNING WARNING
!
These cleaning fluids are usually highly flammable,
and long-term inhalation is harmful to the body. Make
sure to follow the safety warnings of the cleaning fl uid
manufacturer.
◆ Install the CVT driving pulley 【G】, install the
washer 【H】 and the driving pulley bolt 【I】.
◆ Use the CVT anti-rotation tool to fix the CVT drive
pulley, tighten the drive pulley bolt 【I】 to the
specified torque, and tighten the drive pulley bolt
counterclockwise.
◆ Tightening torque
Drive pulley bolt
120 N • m (12.2 kgf • m, 88.5 ft • lb)
3-6-10