Oil Cooler Assembly; Remove The Oil Cooler Assembly; Install The Oil Cooler Assembly - Segway VILLIAN SSV Series Service Manual

B B
A A
C C
D D
ENGINE LUBRICATION SYSTEM

Oil cooler assembly

Oil cooler assembly

Remove the oil cooler assembly

◆ Drain the engine coolant and oil
◆ Disassemble
【A】 Oil cooler assembly
【B】 Bolt M6×40
【C】 Bolt M6×16
【D】 OO-ring 19×2.5

Install the oil cooler assembly

◆ Use a new O-ring and press it into the seal groove
◆ Align the bolt holes of the oil cooler and screw in the
bolts 【B】 【C】
◆ Tightening torque
◆ Replenish engine coolant and oil
CAUTION
!
During installation, check whether the O-ring is intact and not
twisted. If the O-ring is damaged, it will cause oil leakage,
which may cause abnormal wear or even damage to the
internal parts of the engine. If necessary, please replace the
new O-ring in time
3-1-13
Bolt 【B】 【C】
9.8 N•m (1.0kgf•m, 87 in•lb)