Wheel; Wheel Removal; Wheel Installation - Segway VILLIAN SSV Series Service Manual

Front wheel Rear wheel
Recommended
18 psi
tire pressure
( 124 kPa)
The recommended size
The front wheel
29×9.0R14/
30×10.00R14
18 psi
( 124 kPa)
The rear wheel
29×11R14/
30×10.00R14

Wheel

Driving a vehicle with incorrect tire pressure may result in
the following consequences:
◆ Reduce fuel effi ciency
◆ Reduce driving comfort and shorten tire life
◆ Safety reduction
When checking tire pressure, follow the following
instructions:
◆ Inspection can only be carried out after the tire cools
down.
◆ If the vehicle has been parked for at least 3 hours,
or has not driven more than 1.5km (0.9mi), the
check at this time can get an accurate reading of the
cold tire infl ation pressure.
◆ Do use tire pressure gauges. Tire appearance
can sometimes be misleading. In addition, even a
few pounds less air in a tire can affect driving and
handling performance.
◆ Don't reduce the tire pressure after driving.
Increased tire pressure is normal after driving.

Wheel Removal

1. Position the vehicle on a level surface.
2. Place the transmission in PARK and stop the engine.
3. Loosen the wheel nuts slightly. If wheel hub removal
is required, remove the wheel cap, cotter pin and
loosen the hub nut slightly.
4. Elevate the appropriate side of the vehicle by placing
a suitable stand under the frame.
5. Remove the wheel nuts and remove the wheel.

Wheel Installation

The installation of tires is opposite to the removal of tires. Please
tighten the four tire nuts to the specifi ed torque value.
Torque of Mounting nuts
100~120N.m (51-59ft·lb)
!
Do not use wheels of diff erent sizes than recommended
in the User's Manual as this can cause the vehicle to
lose control.
2 - 27
MAINTENANCE