MAINTENANCE
A
C
C
D
Front axle oil fi lling
【A】Filling plug
【B】
【B】O-ring
1. Position the vehicle on a horizontal plane. Remove
the drain plug.
2. Place the drain tray under the demand drive unit.
Remove the drain plug【B】. Allow the fl uid to drain
completely.
3. Clean and reinstall the drain plug【B】. Torque to
B
C
desired value.
4. Add the recommended amount of liquid.
5. Reinstall the injection plug.Torque to desired value.
6. Check the leakage situation. Dispose of used liquids
properly.
Rear gearbox oil fi lling
【A】drain plug
【B】O-ring
【C】Oil dipstick
【D】O-ring
B
1. Position the vehicle on a horizontal plane. Remove
A
the drain plug.
2. Place the drain tray under the demand drive unit.
Remove the drain plug【A】. Allow the fl uid to drain
completely.
3. Clean and reinstall the drain plug【A】. Torque to
desired value.
4. Unscrew the oil dipstick of the rear gearbox.Add the
recommended amount of liquid.
5. Re-tighten the oil dipstick of the rear gearbox.
6. Check the leakage situation. Dispose of used liquids
properly.
2 - 22
Drain Plug
Torque of
Filling Plug/Drain pulg
16-20N.m(11.8-14.8ft·lb)
Torque of
16-20N.m(11.8-14.8ft·lb)
Drain pulg