FRONT & REAR SUSPENSION
TECHNICAL PARAMETER
Front absorber:
• Preloading setting position of normal hydraulic
damping absorber spring (From the bottom of
the upper mounting seat to the position of the
adjusting nut)
Rear absorber:
• Preloading setting position of normal hydraulic
damping absorber spring (From the bottom of
the upper mounting seat to the position of the
adjusting nut)
High speed compression damping adjustment
(clockwise adjustment)
Low speed compression damping adjustment
(clockwise adjustment)
Restore damping adjustment (from clockwise
adjustment)
gaseous tension
Item
Setting
64":35mm(1.4in.)
72":85mm(3.34in.)
64":130mm(5.1in.)
72":170mm(6.7in.)
3 gear
1 turn
1 gear
9 - 6
Available range
20 ~ 45mm
(0.8 ~ 1.8in.)
65 ~ 95mm
(2.6 ~ 3.74in.)
120 ~ 150mm
(4.73 ~ 5.9in.)
170 ~ 210mm
(6.7 ~ 8.37in.)
1gear ~ 9 gear
0 ~ 2.5 turn
1gear ~ 14 gear
1Mpa