Replace Oil Fi Lter/Oil Strainer - Segway VILLIAN SSV Series Service Manual

MAINTENANCE
A
D
B C
Replace oil fi lter/oil strainer
Change the oil fi lter and clean the oil strainer every time
you change the oil
Change Oil Filter
The oil filter is located inside the left rear wheel of the
vehicle. Please refer to the fluid recommendation table
for capacity and plug torque. Always change the fi lter at
the same time as the oil change.
【A】 Oil Filter
◆ Use a jack to lift the rear of the vehicle to a certain
height.
◆ Remove the bolts under the left rear shock absorber,
and place the shock absorber tilted back aside.
◆ Unscrew the oil fi lter with a tool, and pay attention to
the direction of the screw when unscrewing.
◆ Install a new fi lter and manually rotate it clockwise
until the filter gasket touches the sealing surface
until it is tightened.
◆ Re-fix the lower installation point of the left shock
absorber with bolt M12×1.25×7.
Clean oil strainer
【B】
【C】O-ring
【D】oil strainer
Torque of Drain Plug
16-20N.m(11.8-14.8ft·lb)
◆ Remove the drain plug, take off the O-ring, and take
out the oil strainer;
◆ Put the oil strainer into the cleaning aid for cleaning,
and dry the cleaned strainer;
◆ Reinstall the washed oil strainer and replace the
new O-ring when installing.
2 - 16