Segway VILLIAN SSV Series Service Manual page 309

VEHICLE BODY AND FRAME
◆ Remove the rear section of the front drive shaft and
the rear drive shaft. (See related chapters for details)
◆ Remove the rear section of the front drive shaft and
the rear drive shaft. (See related chapters for details)
◆ Remove the mounting bolts (hexagon flange
A
bolt M12×1.25×85) and nuts (hexagon flange
lock nut M12×1.25) of the engine front mounting
seat assembly, the engine lower mounting seat
assembly and the frame, after removing the engine
Install the mounting bolts (hexagonal flange bolts
M12×1.25×220) and nuts (hexagonal flange bolts
M12×1.25) of the seat assembly and the frame, and
remove the engine rear liner [A] at the same time,
and remove it from the top Lift out the engine.
13 - 32