Segway VILLIAN SSV Series Service Manual page 297

VEHICLE BODY AND FRAME
◆ Remove the bolts of the middle bottom plate
assembly (large pan-head hexagon socket bolts
6-M6×16), and remove the middle bottom plate
assembly (one for each on the left and right).
◆ Remove the decorative plug fi xing screw (hexagon
socket countersunk head screw 2-M6×16) and
remove the decorative plug; remove the front
fi xing bolt of the upper connecting plate of the front
support (hex flange bolt 2-M8×20) And side fixing
bolts, hexagonal fl ange bolts 2-M8×20), and remove
the upper connecting plate of the front support.
◆ Remove the mounting bolts (hexagonal fl ange bolts
2-M8×16) of the front support assembly of the frame
and remove the front support assembly of the frame.
Before this, you need to remove the plastic parts
such as the front headlight cover, front panel and
the pipelines fi xed on the front support assembly of
the frame (for details, refer to the relevant chapters)
◆ To install the frame attachment, follow the reverse
procedure
!
After installation, the upper bracket of the storage box
should be after the rear cargo box is assembled. (Refer
to relevant chapters for details)
13 - 20