Install Winch Motor - Segway VILLIAN SSV Series Service Manual

C B
C
C
A
B

Install winch motor

◆ The order of assembly and disassembly is reverse,
◆ Then connect the battery.
◆
!
winch work shall not exceed 1min each time, and shall
work after 30S interval
◆ Rated working voltage DC12V
◆ The maximum working tension is 3500LB,
◆ The maximum working current ≤ 1 8 5 A, the
◆ The diameter of the wire rope is 4.8, and the length
The color of the insulation pad of the winch motor
terminal and the heat shrinkable tube of the cable is one-
A
to-one correspondence
【A】YELLOW
【B】BLUE
【C】NUT
The winch motor is a component that cannot be
repaired. If the winch motor is faulty, the component
must be replaced in time.
The color of the winch relay terminal corresponds to the
color of the heat shrinkable tube of the cable one-to-one
【C】YELLOW
【D】BLACK
【E】RED
【F】BLUE
D
The winch relay is a component that cannot be repaired.
If the winch relay is faulty, the component must be
replaced in time.
14 - 93
ELECTRICAL SYSTEM
install the winch motor and connect the cables;
maximum working current lasts for 1 min, and works
after an interval of 30 seconds, and continues to
work in this way
of the wire rope is 14.5 meters
Torque of nut【C】
4 N·m（0.4 kgf·m，2.9ft·lbs）