CYLINDER HEAD, CYLINDER, PISTON
CYLINDER HEAD, CYLINDER, PISTON
Cylinder head cover
Remove the cylinder head cover
A A
◆ Disassembly:
B B
【A】 Hexagon socket pan head stepped bolt
C C
【B】 Washer 10.6×18×1
D D
【C】 Rubber gasket 10
【D】 Cylinder head cover
E E
【E】 Cylinder head cover sealing ring
Install the cylinder head cover:
◆ If oil leakage occurs, the gasket 【B】 and sealing
ring 【E】 should be replaced.
◆ Before installing the sealing ring 【E】, apply silicone
rubber to the corners of the two raised blocks.
◆ Sealing agent.
◆ Installation
【E】 Cylinder head cover sealing ring
【D】 Cylinder head cover
【C】 Rubber gasket 10
【B】 Washer 10.6×18×1
【A】 Hexagon socket pan head stepped bolt
◆ Tightening torque
3-5-14
Bolt 【A】
9.8 N•m (1.0kgf•m, 87in•lb)