DRIVE SYSTEM
INSTALLATION OF DRIVE SHAFT
A
◆ Install a new retaining ring in the spline groove
◆ The spline of the driving shaft is aligned with the
◆ If necessary, use a rubber mallet to hit the outer end
◆ Steering knuckle, rocker arm, steering rod, shock
8 - 12
【A】, apply anti-biting agent on the spline;
diff erential spline, push inward along the horizontal
arrow direction, and load the driving shaft;
of the drive shaft, into the drive shaft;
absorber, etc., should be assembled in reverse
according to the above disassembly sequence.