Install The Countershaft Low-Speed Gear; Install The Driven Bevel Gear Shaft - Segway VILLIAN SSV Series Service Manual

FRONT AXLE AND REAR GEARBOX FRONT AXLE AND REAR GEARBOX
B B C C
A A
D D E E
A A
B B
C C
D D
E E

Install the countershaft low-speed gear:

【A】 Washer 30×40×1.5
【B】 Needle roller bearing K28×33×17
【C】L gear driven gear
【D】 Washer 30×40×1.5
【E】 Circlip 30×2.5
◆ Tools: external circlip pliers.
◆ Load 【A】, 【B】, 【C】, 【D】, and 【E】 into
the countershaft in the order shown in the fi gure.

Install the driven bevel gear shaft:

【A】 Driven bevel gear shaft
【B】 Deep groove ball bearing 6207
【C】 Driven bevel gear shaft spacer
【D】Nut M33×1.5
【E】 Deep groove ball bearing 6206
◆ Tools: 46mm sleeve, 32mm sleeve, driven bevel
gear shaft tooling seat, driven bevel gear shaft
spline sleeve.
◆ Install 【B】 and 【C】 into 【A】 in the order
shown in the fi gure, lock 【D】 clockwise to a torque
of 240N·m, and then install 【E】 into 【A】.
4 - 26