Toggle Switch For Two-Wheel Drive Or Four-Wheel Drive - Segway FUGLEMAN UT10 2022 Owner's Manual

2 x 4 patterns
When the two-four-wheel drive switch is in the two-wheel drive
state, the whole vehicle is only driven by the rear wheel, and the
front wheel has no power output. The meter shows the symbol
" " for the second drive. This mode is suitable for vehicles
driving on flat roads.
4 x 4 patterns
When the two-four-wheel drive switch (4-wheel drive switch) is
pressed, the symbol "
instrument. At this time, the instrument is in the state of 4-wheel
drive, with power output of the front wheel and power output
of the rear wheel. This mode is suitable for muddy conditions,
mountainous conditions and other bad road conditions.
4×4 locking mode
When the two-four-wheel drive switch (4-wheel drive switch) is
pressed, the four-wheel drive lock symbol "
the instrument. At this time, the four-wheel drive lock is working in
the state of 4-wheel drive lock. The front wheel has power output,
the rear wheel has power output, and the left and right tires of the
rear wheel output the same speed and power. The vehicle will in
speed limitation and speed cannot more than 18 MPH (30km/h),
this mode is suitable for vehicle in troubles.
VEHICLE DEVICE VEHICLE DEVICE
" of 4-wheel drive is displayed on the
37
" is displayed on