Segway VILLIAN SSV Series Service Manual page 235

FRONT & REAR SUSPENSION
A
C
absorber damping adjustment
To accommodate a variety of riding conditions, the spring
preload can be adjusted for shock absorbers or spring
replacements. The damping force can also be easily
B
adjusted without changing the oil viscosity.
Compression damping adjustment
◆ With 16mm sleeve to rotate the compression
damping regulator 【A】 at the upper part of the
cylinder seat, can adjust the compression resistance
under high speed vibration frequency, clockwise
direction (H) damping to increase, counterclockwise
direction (S) damping to reduce.
◆ U s e a f l a t - h e a d s c r e w d r i v e r t o r o t a t e t h e
compression damping regulator 【B】 at the
upper part of the cylinder seat to adjust the
compression resistance under low speed vibration
frequency. Clockwise (H) damping is increased, and
counterclockwise (S) damping is decreased.
The compression damping regulator has 8 gears, and the
factory set gear is the fi rst gear.
Reset damping adjustment
Turn the damping regulator at the bottom with a flat-
head screwdriver to increase the damping in the
needle direction (H) and decrease the damping in the
counterclockwise direction (S).
The restoration damping regulator has a total of 12 gears,
and the factory set gear is the sixth gear.
Tool: 【C】 fl at-head screwdriver
9 - 10