Add Engine Oil - Segway VILLIAN SSV Series Service Manual

Add engine oil

The engine oil adding port is located under the cargo
engine maintenance cover.
◆ Unscrew the oil cap counterclockwise.
◆ Add an appropriate amount of the recommended
type of oil and do not overfi ll it. The oil level between
the upper scale and the lower scale is appropriate.
◆ Retighten the oil cap.
◆ Put the gear shifter in parking gear.
◆ Lock parking brake.
◆ Start the engine and leave it idle for 1 to 2 minutes.
◆ Stop the engine.
◆ Check for leaks.
◆ Check the oil level and add oil as needed to make
the oil level reach the mark on the ruler.
◆ Properly handle used fi lters and oil.
Valve Clearance Inspection
IMPORTANT: Valve clearance inspection should be
performed on a cold engine, at room temperature.
1.Remove the seats and engine service panel.
2.Disconnect the negative (-) battery cable.
3.Remove the rear bumper and cargo box as an
assembly (see Chapter 5).
4.Remove the (8) screws that retain the outer clutch
cover.
5.Maneuver the outer clutch cover for drive clutch access.
Removal of left rear wheel or left rear shock is NOT
necessary to perform this procedure.
2 - 17
MAINTENANCE