Dismantling The Right Gearbox Connector; Dismantling The Right Gearbox Assembly; Dismantling The Reverse Gear Idler Shaft Assembly And Main Shaft Assembly - Segway VILLIAN SSV Series Service Manual

FRONT AXLE AND REAR GEARBOX FRONT AXLE AND REAR GEARBOX
A A
B B
B B
A A
C C
F F
D D
E E
A A
B B
C C
A A
B B
D D
C C

Dismantling the right gearbox connector

【A】Gear sensor assembly
【B】 Bolt M6×16
【C】 Circlip 30×2.5
【D】 Washer 30×40×1.5
【E】L gear driven gear
【F】Needle roller bearing K28×33×17
◆ Tools: 8mm sleeve, external circlip pliers.
◆ Unscrew the bolt【B】 counterclockwise, remove
【A】, and use circlip pliers to remove Next 【C】,
remove 【D】and【E】in turn.

Dismantling the right gearbox assembly

【A】 Bolt M8×40
【B】Right gearbox assembly
【C】 Bolt M8×60
◆ Tool: 10mm sleeve.
◆ Unscrew the bolts【A】and【C】 counterclockwise,
and remove 【B】.
◆ Separate the right box assembly, if necessary, use
a rubber hammer to hit the joint surface around the
box.
Dismantling the reverse gear idler shaft
assembly and main shaft assembly
【A】Reverse gear idler shaft assembly
【B】 Spindle assembly
◆ Remove【A】, then remove【B】.
Dismantling the Gear positioning bolt
【A】 Gear positioning bolt
【B】 Aluminum washer 14×21×1.5
【C】 Gear positioning spring
【D】 Steel ball 9.5
◆ Tool: 14mm sleeve.
◆ U s e a s l e e v e t o u n s c r e w t h e b o l t 【 A 】
counterclockwise, and take out 【B】, 【C】, and
【D】.
4 - 16