Executing Top Search - Mitsubishi Electric MELDAS 600M Series Instruction Manual

2.5.2 Executing top search

Top search is used to designate the start position in the program at a random position when executing
restart search and machining time calculation.
Always carry out top search.
(1) Operation method
(2) Notes for top search
1)
2)
3)
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
1)
Set the program device and
directory for top search.
(Note) The setting method is the same as operation search. Refer to "2.4.1 Executing an
operation search".
2)
Set the program No., and
press the key.
INPUT
Set the sequence No. and block No. in N and B
respectively.
(Note) Always set the program No.
3)
Press the menu key
.
Top search
Always carry out a top search before restart search. An operation error occurs if not carried out.
O No. (program number) cannot be omitted.
If one or two , N and B Nos. are set, the numbers that are not set are ignored.
search engine
The selected device name and directory path appear in
the setting column.
Device HD
Directory /PROGRAM
The set numbers appear in the setting column.
Top search starts. When top search is completed, a
message appears.
The setting column contents are cleared.
I – 55