Mitsubishi Electric MELDAS 600M Series Instruction Manual page 146

(6) Selecting a device file other than the NC memory
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu
.
Device select
2)
Select a device.
HD
3)
Designate the directory.
Select the menu
Dir
When inputting the directory from the data setting area
4)
Input the directory path as a
full path.
PRG/PRECUT
INPUT
Next, refer to the operation in
step 5).
When selecting the directory from the list
4)-1
Press the menu
From list
4)-2
Move the cursor to directory to
be selected, and fix.
,
INPUT
↑ ↓
Repeat this operation until the
target directory is reached.
When the target directory is
reached, press the
and quit the mode for inputting
the directory.
Next, refer to the operation in
step 5).
search engine
3. Setup Screens
The following menu appears.
Memory RS232C
The device name appears. The root directory is
selected as the default.
The mode changes to the mode for inputting the
directory name.
.
The following menu appears.
From
list
The cursor appears in the list.
.
<Program>
10011 518 93.01.20 13:43
10012 130 93.01.20 13:43
10013 100 93.01.20 13:43
10014 162 93.01.20 13:43
PRG DIR 93.01.20 13:43
The selected directory appears in the data setting
column.
The contents of the selected directory appear in the list.
key
I – 131
HD IC card Ethernet
<Char> <Comment>
FLD