Mitsubishi Electric MELDAS 600M Series Instruction Manual page 424

(2) Battery handling precautions
• Always replace the battery with the same type battery.
• Do not disassemble the battery.
• Do not incinerate the battery or immerse it in water.
• Do not deform the battery by pressurizing.
• This is a disposable battery. Do not recharge.
• Dispose of the spent battery according to local laws.
Downloaded from ManualsNet.com
CAUTION
If the BATTERY LOW warning is output, save the machining programs, tool data and
parameters to an input/output device, and then replace the battery. If the BATTERY alarm
occurs, the machining programs, tool data and parameters may be damaged. After replacing
the battery, reload each data item.
Do not replace the battery while the power is ON.
Do not short-circuit, charge, overheat, incinerate or disassemble the battery.
Dispose of the spent battery according to local laws.
search engine
CHAPTER 3 MAINTENANCE
7. Daily Maintenance
III – 38