Standard Pallet Registration Screen (Pallet Prog Regist) - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3.11.1 Standard Pallet Registration screen (Pallet prog regist)

The machining program for the pallet is registered on this screen.
(Note 1) This screen appears when the base common parameter APC type (#110141) is set to 0.
1. Program
2. Machining ON/OFF
3. Aux.
4. Program Search
ON/OFF
5. Program Start
ON/OFF
(1) Display items
1. Pallete prog regist The machining program and device name registered for each pallet are
2. Machining
ON/OFF
3. Aux.
4. Program Search
ON/OFF
5. Program Start
ON/OFF
6. Device Name,
file list
7. M, S, T, B
command
8. Program being
executed
9. Display during
machining
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
displayed.
The ON/OFF state of machining for each pallet is displayed.
If there are any auxiliary functions, the auxiliary function data for each pallet
is displayed. (Refer to the Instruction Manual issued by the machine
manufacturer for details on the corresponding functions.)
The ON/OFF state of search for the registered machining program is
displayed.
The ON/OFF state of continuous start for the registered machining program
is displayed.
When set to ON, the searched program will be restarted for the pallet in the
machine.
This setting is valid only when Program Search is set to ON.
The device names and a list of the files are displayed.
Each M, S, T, B command value is displayed.
A manual value command can be issued.
The program being executed is displayed.
"Machined" is displayed for the pallet in the machine.
search engine
3. Setup Screens
Details
I – 209
6. Device Name,
file list
9. Display during
machining
7. M, S, T, B
command
8. Program being
executed