Mitsubishi Electric MELDAS 600M Series Instruction Manual page 254

(2) Notes for playback editing
1) Playback editing of a program in automatic operation is not possible.
2) Up to 95 characters can be edited in the playback editing area.
3) If the program to be edited is in the playback edit area and the Play back menu or Cancel
4) Other files can be opened during playback editing. Playback editing can be continued even when
5) If the program being playback edited automatically starts, playback editing cannot be continued.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
(Note 2) When the page change key is pressed, the program in the left area will scroll.
(Note 3) When the menu key is pressed, the process corresponding to the left area will run.
6)
Press the axis address key
such as X or Y.
(Note) When inputting a comment, etc., the characters that are the same as the axis
address will all be handled as the axis address.
7)
Press the INPUT key.
8)
Save the program, and press
the menu key Play back .
Playback editing can also be
ended by pressing the Cancel
button.
button is pressed to change the screen, the program being edited will be aborted.
another file is opened. However, if an incremental value is designated, the playback movement
amount will be cleared to 0 for all axes. A new file can be created and edited, and MDI editing
carried out in the same manner.
search engine
4. Edit Screens
The playback movement amount is input after the axis
address in the playback editing area.
If the axis address key is pressed while the playback
movement amount is being changed, the playback
movement amount at the time the key was pressed will
be input.
The program in the playback editing area will be
inserted at the line before the cursor position in the left
area.
For an absolute value, the playback movement amount
will not change.
For an incremental value, the difference of the axis
command value for the axis used in step 6) and the
playback movement amount will remain as the
playback movement amount.
Playback editing will end. The right area will be erased,
and the screen (list, etc.) displayed previously will
appear.
I – 239