Mitsubishi Electric MELDAS 600M Series Instruction Manual page 66

(2) Canceling the verify stop
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
3)
Press the menu key
.
Verify stop
4)
Start the automatic operation.
(Note 1) When registering the stop position (O, N and B values), confirm that the block exists
in the searched program. If the block corresponding to the registered stop position
is not found, operation continues without executing compare stop.
Always set one of O, N or B.
(Note 2) If none of the numbers are set, a setting error occurs.
(Note 3) If one or two of O, N and B Nos. are set, the other numbers not set are ignored
during the search.
(Note 4) Verify stop can also be registered during operation.
1)
Press the menu key
.
Stop cancel
(Note) Verify stop can also be canceled during operation.
search engine
When the verify stop is completed, a message
indicating the end appears.
The stop position displayed on the screen is displayed.
The stop position displayed on the screen is cleared.
I – 51