Table of Contents
Advertisement
6.2 Absolute Position Setting screen
The absolute position of the servo axis (random NC axis, PLC axis) is set on this screen.
The execution stage of the zero point initialization is displayed at "Status" and "Machine end".
Set the required data in the absolute position setting data items, and set the absolute position.
The data setting details are explained in this section.
1. Status display
2. Machine end
display
3. Various data for
absolute
position setting
(1) Display items
1. Status display
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
The execution stage of the zero point initialization is displayed.
(a) When the absolute value is lost, "0" is displayed.
(b) "1", "2" or "∗" are displayed according to the zero point initialization
Meaning of display when using machine end stopper method
1 : From after the "1 Ref position set" is set, to when the current limit is
2 : From when the stopper current limit is reached to when the
∗ : The absolute position is established.
Meaning of display when using reference point method
2 : From after the "1 Ref position set" is set, to when the absolute
∗ : The absolute position is established.
(Note) With either method, "2" displays only when "270008 Ref position
search engine
6. Maintenance Screens
operations.
reached by pushing the table against the machine end.
absolute position reference point (point on grid) is detected.
position reference point (point on grid) is detected.
type" is set to "1".
I – 310
Details
Advertisement
Table of Contents
